Screwdrivers（Tip size / Phillips (+)：No.3）

• 

  Power Grip Screwdriver No.4500

  VESSEL

  An easy-to-grip through screwdriver with an ergonomically designed grip.
  [Features]
  · A plastic handle through-type which is strong against rough use.
  · With a hexagon part that can be tightened strongly with a wrench, etc.
  · The handle is made of cellulose acetate resin and has an ergonomic design.
  [Applications]
  · Through hole type, for demanding work.

  • STOCK

  Standard Price:	216,914 IDR
  Days to Ship:	8 Day(s)

• • On Sale Till 31/03/2026

  

  Ordinary Screwdriver (With Magnet)

  TRUSCO

  It has an ergonomically designed grip that is non-slip.
  It features a magnet at the tip.

  • STOCK

  Standard Price:	138,462 IDR
  	Special Price
  Days to Ship:	1 Day(s)

• 

  Soft Screwdriver set (With Magnet)

  KTC(KYOTO TOOL)

  [Features]
  · Shaft material is Cr-V.
  · The grip is light, not sticky, and uses environmentally friendly elastomer resin.

  • STOCK

  Standard Price:	750,592 IDR-
  Days to Ship:	8 Day(s)

• 

  Ratchet driver DBR

  KTC(KYOTO TOOL)

  [Features]
  · The ratchet mechanism enables fast turning in both directions for loosening and tightening.
  · Fixing the ratchet allows it to be used as a normal screwdriver.
  [Applications]
  · General purpose tool

  • STOCK

  Standard Price:	533,837 IDR
  Days to Ship:	8 Day(s)

• 

  Cross-Head Through Type Screwdriver With Wooden Handle

  KTC(KYOTO TOOL)

  [Features]
  · Traditional screwdriver that makes use of the warm texture of wood.

  Standard Price:	111,341 IDR
  Days to Ship:	8 Day(s)

• 

  Plate ratchet replacement screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · Ratchet operation in both right and left directions is possible with switching lever.
  · Rapid rotation is possible by rotating the gear with the fingertips.
  · Can use 6.3 mm width across flats hex bits.

  • STOCK

  Standard Price:	295,125 IDR
  Days to Ship:	8 Day(s)

• 

  Ratchet Driver Set RDS32

  TONE

  Full set containing screwdriver type handles and tip replacement bits.
  [Features]
  · Screwdriver-type handles with built-in ratchet mechanism are available in 3 types.
  · There are 32 types of replaceable tip bits.
  · A full set of screwdrivers that also accommodates 3 types of extension bit holders.
  [Applications]
  · A complete set ideal for tightening/loosening flathead / Phillips head screws and hexagon socket bolts.
  · Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.

  Standard Price:	1,729,862 IDR
  Days to Ship:	1 Day(s)

• 

  Through Screwdriver Set KD6

  TONE

  Square shaft through screwdriver.
  [Features]
  · 6-piece set. Plastic grip.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  • STOCK

  Standard Price:	710,769 IDR
  Days to Ship:	12 Day(s)

• 

  Long Shaft Screwdriver Set (Through) KLD3

  TONE

  The overall length is as long as 380 mm, ideal for work in places not reachable by standard types. Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening. The tip has a high-strength magnet.

  Standard Price:	568,328 IDR
  Days to Ship:	12 Day(s)

• 

  Impact Screwdriver Bit

  ANEX

  [Features]
  ·Compatible with 8 mm hexagonal shaft and single-headed bits.
  ·Bits for manual impact drivers.

  • STOCK

  Standard Price:	30,598 IDR-
  Days to Ship:	1 Day(s)

• 

  Soft screwdriver (penetrating type with magnet)

  KTC(KYOTO TOOL)

  [Features]
  · The grip is light, not sticky, and uses environmentally friendly elastomer resin.
  · The shaft is round.
  · Through-hole type.

  • STOCK

  Standard Price:	223,692 IDR
  Days to Ship:	1 Day(s)

• 

  Resin Handle Screwdriver (with Throughput/Magnet)_with Bolster

  KTC(KYOTO TOOL)

  [Features]
  · Square resin grip which makes it easy to apply force.
  · There is a hexagonal part at the base of the shaft.
  · Shaft is hexagon shaped.
  · Shaft material is Cr-V.
  [Applications]
  · General purpose tool

  • STOCK

  Standard Price:	191,856 IDR
  Days to Ship:	8 Day(s)

• 

  KTC(KYOTO TOOL) Impact Screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · Lightweight and easy to use product.
  · Exhibits power in loosening excessively tightened screws and rusted screws.
  · Shaft material is Cr-V.

  • STOCK

  Standard Price:	46,245 IDR
  Days to Ship:	8 Day(s)

• 

  Soft Finish® Screwdriver Set (Set of 6)

  WIHA

  [Features]
  · 6-piece flathead and Phillips screwdriver set with Wiha SoftFinish handle.
  · Round blade is made of high-grade chrome vanadium molybdenum steel.
  · It has been quenched with a chrome plated finish.
  · High-Precision Wiha ChromTop Process for Corrosion-Resistant Tip

  Standard Price:	1,467,943 IDR
  Days to Ship:	12 Day(s) or more

• 

  Power Grip Screwdriver Set PLPGD7

  TONE

  [Features]
  · New form and materials provide an ergonomic driver that is easier to grip and turn.
  · Parallel tip shape prevents damage to screw head slots.
  · Original Phillips head screwdriver tip shape fits perfectly to prevent tip extending to the bottom of the screw head slot.
  · (PGPD-002, 003) Utilizes double-structure resin in red for the Phillips head screwdriver and gray for the straight slotted screwdriver so they are distinguishable at a glance.
  Excellent workability.
  · Tip is equipped with a strong magnet.
  · Tray size inserts inside existing tool cases.
  

  Standard Price:	828,812 IDR
  Days to Ship:	12 Day(s)

• 

  Power Grip Screwdriver Set PLPGD6

  TONE

  [Features]
  · New form and materials provide an ergonomic driver that is easier to grip and turn.
  Parallel tip shape prevents damage to screw head slots.
  Original Phillips head screwdriver tip shape fits perfectly to prevent tip extending to the bottom of the screw head slot.
  (PGPD-002, 003) Utilizes double-structure resin in red for the Phillips head screwdriver and gray for the straight slotted screwdriver so they are distinguishable at a glance.
  Excellent workability.
  Tip is equipped with a strong magnet.
  Tray size inserts inside existing tool cases.
  

  • STOCK

  Standard Price:	1,183,077 IDR
  Days to Ship:	1 Day(s)

• 

  Piercing Screwdriver KPD-003

  TONE

  A piercing square-shafted driver with a plastic grip.
  [Features]
  · Phillips shaft length: 150 mm, total length: 260 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Convenient for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Standard Price:	116,005 IDR
  Days to Ship:	1 Day(s)

• 

  Long Shaft Screwdriver (Through) KLD-P

  TONE

  Ideal for work at places where standard long shaft screwdrivers cannot reach.
  [Features]
  · Cross-recessed end +No.2, total length 380 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · A through type with magnetic tip with axial length of 275 mm.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Standard Price:	189,443 IDR
  Days to Ship:	1 Day(s)

• 

  SUS Screwdriver SPD-003

  TONE

  An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · This stainless steel tool is made of martensitic material that emphasizes strength, is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
  [Applications]
  · Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
  · Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.

  • STOCK

  Standard Price:	946,154 IDR
  Days to Ship:	1 Day(s)

• 

  SUS Screwdriver Set SD8

  TONE

  An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
  · Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.

  • STOCK

  Standard Price:	4,184,615 IDR
  Days to Ship:	1 Day(s)

• 

  Megadora Tang-Thru Screwdriver No. 930

  VESSEL

  Easy-to-use through screwdriver that is easy to grip however you hold it.
  [Features]
  · The cross-recessed end firmly grips the screw.
  · Through type, with a large nut.
  · With a hex bolster for wrenches.
  [Applications]
  · For various screw fastening work.

  • STOCK

  Standard Price:	254,962 IDR
  Days to Ship:	8 Day(s)

• 

  Impact Screwdriver D-963

  HOZAN

  Impact screwdriver with interchangeable left and right rotation.
  [Features]
  · Driver bit rotates at high torque when hit with a hammer, loosening rusted screws easily.
  · Protective grip with collar to protect the hand holding the driver.
  · A 12.7 mm square socket can be attached by removing the bit holder.
  · Case included
  [Applications]
  · Ideal for turning screws that are difficult to loosen.

  Standard Price:	59,690 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Standard Screwdriver No. 900, MEGADORA

  VESSEL

  Easy-to-use regular screwdriver that is easy to grip however you hold it.
  [Features]
  · The cross-recessed end is a jaw fit which firmly grips the screw.
  · The knurled shaft prevents slippage of fingers and enables holes in wood or boards to be widened.
  [Applications]
  · For various screw fastening work.

  • STOCK

  Standard Price:	189,231 IDR
  Days to Ship:	1 Day(s)

• 

  BAHCO, 22-Piece Stubby Ratcheting Screwdriver Set

  BAHCO

  Based on ergonomics, it is easier to grip and leads to prevention of injuries. For fine work.

  • STOCK

  Standard Price:	1,821,692 IDR
  Days to Ship:	1 Day(s)

• 

  Ergonomic Screwdriver

  BAHCO

  Based on ergonomics, it is easier to grip and leads to prevention of injuries.
  
  [Features]
  · A bolster (with a hex bolt) is installed where the grip and the shaft meet, increasing the tightening torque when using a wrench and pliers in combination.
  · The non-fading, bit-shape identifying color coding and symbol display applied on the shaft portion side of the grip and on the grip end allow users to recognize the bit shape almost instantly. The same tools are used to prevent racing car pit crews, for whom every second counts, from choosing the wrong tool. Allows the user to strike the grip end with a hammer, similar to using a through screwdriver.
  · Adopts a small-diameter round shaft that can be easily tightened and loosened.
  · The moderate length of the grip neck fits fingers well and enables quick rotation and accurate torque control.
  · Handle with 3 major features. Ergo-grip, bit shapes with color-coded coatings, and symbols, with a comfortable ergo-grip inner structure for strength and robustness. The handle has a bar code.
  · Designed to take advantage of the round cross section and to fit without any resistance regardless of which direction it is held.
  · The surface of the anti-slip grip is corrugated for maximum comfort, and a soft high-friction material is used. Enables maximum grip even with oily hands.
  · This flat part stops the screwdriver from rolling.
  · Holes for display. Can also be used to prevent falls from high places by threading with a string.
  · The grip end is large and round, so it allows the user to apply force when performing tightening and loosening work, without feeling any pain in the palm.

  Standard Price:	615,413 IDR
  Days to Ship:	11 Day(s) or more

• 

  Stubby Phosphorescent Screwdriver (Magnetic)

  ANEX

  [Features]
  · Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
  · Made of martensitic special stainless steel (high strength stainless steel (550)).

  • STOCK

  Standard Price:	200,308 IDR
  Days to Ship:	1 Day(s)

• 

  "Superfit" ACR Heavy-duty Screwdriver (Magnetic)

  ANEX

  [Features]
  ·The shape of the tip has a structure that makes it difficult to come out (ACR (R) for the Phillips, serrated for the Slotted) to prevent the cutting edge from rising from the screw.
  ·With a hexagonal bolster, you can use a wrench to turn it more strongly.

  • STOCK

  Standard Price:	260,923 IDR
  Days to Ship:	1 Day(s)

• 

  Bis Breaker Screwdriver (Magnetic)

  ANEX

  With a special tip shape, you can rotate a stripped screw.

  • STOCK

  Standard Price:	140,000 IDR
  Days to Ship:	1 Day(s)

• 

  "Mag Driver 22" Screwdriver (Magnetic)

  ANEX

  [Features]
  · With a total length of 22 mm, even narrower spaces can be supported.
  · Easy removal and refitting of bit.

  • STOCK

  Standard Price:	87,693 IDR
  Days to Ship:	1 Day(s)

• 

  Ultra-Stubby Screwdriver

  ANEX

  [Features]
  · Wide (large) handle that makes it easy to apply force. (Handle diameter 40 mm)
  · Ultra-short stubby screwdriver, which can get into even narrow spaces.
  · An ultra-short tool bit is used.
  [Applications]
  · Work in narrow spaces.

  • STOCK

  Standard Price:	101,610 IDR
  Days to Ship:	8 Day(s) or more

• 

  Super Action Grip Screwdriver

  ANEX

  [Features]
  ·Suitable for removing screws that require force.
  ·A single screwdriver can be used in two different ways: straight and T-shaped.
  ·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.
  ·T shape: For initial loosening and retightening that requires force.
  ·Straight type: For normal screwdrivers (fast turning).
  ·Bit replacement formula.
  ·With magnet (bit).
  ・ With storage case.

  • STOCK

  Standard Price:	934,615 IDR
  Days to Ship:	1 Day(s)

• 

  Ratchet driver with flexible shaft

  ANEX

  [Features]
  · Ideal for fastening screws on corners and edges.

  • STOCK

  Standard Price:	335,385 IDR
  Days to Ship:	1 Day(s)

• 

  "NEJIPITA Ratchet Screwdriver" (Magnetic)

  ANEX

  [Features]
  · A single ratchet driver capable of turning 4 types of screws, (+) No.1, (+) No.2, (+) No. 3 and (-) 6.
  · The ratchet mechanism makes it possible to fasten screws with one hand.
  [Applications]
  · For screw removal work, etc.

  • STOCK

  Standard Price:	127,864 IDR
  Days to Ship:	1 Day(s)

• 

  Offset Ratchet Driver (Straight Type)

  ANEX

  [Features]
  ·For screwdrivers in narrow spaces.
  ·Ultra-thin head 21 mm by adopting ultra-short bit.
  ·19 mm total length ultra-short bit.
  ·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
  ·Straight type.
  [Applications]
  ·For work such as removing screws in narrow spaces.

  • STOCK

  Standard Price:	218,080 IDR
  Days to Ship:	1 Day(s)

• 

  Offset Ratchet Screwdriver (Bent-Up Head Type)

  ANEX

  [Features]
  · Uses an ultra-thin type head ratchet structure for convenient work in a tight workspace.
  · Magnet type chucking enables easy attachment and detachment of bits.
  [Applications]
  · For screw removal work in narrow places.

  • STOCK

  Standard Price:	230,769 IDR-
  Days to Ship:	1 Day(s)

• 

  Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)

  HIRAI KOGU

  Strongly tighten or loosen by hitting the butt and pushing in a screw.

  • STOCK

  Standard Price:	119,659 IDR
  Days to Ship:	1 Day(s)

• 

  "Attack Screwdriver" Set

  KO-KEN TOOL

  [Features]
  · The cam part has been hard heat treated for improved abrasion resistance.
  · The head portion is slightly softened to prevent breakage to the body due to impacts.
  · Removing the bit holder allows for a generic socket to be used as it has a 12.7 mm insertion angle.

  Standard Price:	1,017,950 IDR
  Days to Ship:	12 Day(s)

• 

  Mini Ratchet Bit Driver

  SUEKAGE TOOL

  A compact design optimal for portability. The mini ratchet has a gear with 52 teeth, which results in a brisk rotation that increases work productivity. Includes a rotating plastic case that can be opened and closed compactly.

  Standard Price:	599,830 IDR
  Days to Ship:	12 Day(s)

• 

  Mini Reverse Gear Ratchet

  SUEKAGE TOOL

  Has a compact head that is the best in its class. The number of gear teeth is 52, and it turns with a satisfying feeling, improving work efficiency. The total height of the head with the included short bit attached is 16.5 mm.

  • STOCK

  Standard Price:	846,154 IDR
  Days to Ship:	1 Day(s)

• 

  Piercing Screwdriver (Incorporating Magnet)

  TRUSCO

  [Features]
  · Features a non-slip ergonomically designed grip.
  · The hexagon nut attached to the base of the shaft can be used together with a wrench to enable strong turning.

  • STOCK

  Standard Price:	241,385 IDR
  Days to Ship:	1 Day(s)

• 

  "Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic)

  TRUSCO

  [Features]
  · Supports 4 sizes ((-) 6, (+) No.1, (+) No.2, (+) No.3) with a single unit.
  · The radially processed grip does not become slippery even with greasy hands.
  · It generates a powerful tightening torque, and has a strong ball cushioned grip.

  • STOCK

  Standard Price:	93,505 IDR
  Days to Ship:	1 Day(s)

• • On Sale Till 31/03/2026

  

  Offset Ratchet Driver TRD-415·TRD-417

  TRUSCO

  [Features]
  · The ratchet mechanism enables fast turning in tight spaces.
  [Applications]
  · For screw removal work in narrow places.

  • STOCK

  Standard Price:	192,479 IDR
  	Special Price
  Days to Ship:	Same day

• 

  Craft Form Screwdriver

  WERA

  [Features]
  · The lasered tip provides exceptional bite into screws.
  · Special grip design provides an easy grip and comfortable fit.

  • STOCK

  Standard Price:	434,359 IDR
  Days to Ship:	1 Day(s)

• 

  Craft Form Plus Screwdriver

  WERA

  [Features]
  · The lasered tip provides exceptional bite into screws.
  · Special grip design provides an easy grip and comfortable fit.
  · Equipped with a bolster that can be firmly tightened with a wrench, etc.

  Standard Price:	533,676 IDR
  Days to Ship:	12 Day(s)

• 

  Chisel Driver Set (Penetrating Type)

  WERA

  Special grip design provides an easy grip and comfortable fit.

  Standard Price:	2,505,847 IDR
  Days to Ship:	12 Day(s)

Loading...