Laboratory Materials / Sheets / Packings（Page3）

• 

  Long Working Distance Objective Lens (Same Focal Length 45 mm), EPL Series

  AS ONE

  [Features]
  · A long-operation objective lens used for coaxial observation systems, optical systems using lasers, etc., with a parfocal distance of 45 mm using infinity compensation.
  · As well as microscope observations of separated photographic subjects, it can be used for concentrating visible laser light.
  · Chromatic aberration is corrected in the visible range (400-700 nm).
  · EPL/EPLE feature a lightweight finish and can improve the response speed of objective lens drive mechanisms (SFS-OBL/SFAI-OBL) using auto focus, etc.
  · A fixing type objective lens holder (LHO-26) is available.
  · An observation unit with coaxial illumination (OUCI-2) and dichroic mount for laser introduction (DIMC) are available as lens barrels for laser processing.
  · * Widen the incident beam to half the pupil diameter (1/e^2) if using the objective lens for laser processing.
  · * A small condensed light spot cannot be achieved if the incident beam is too thin.
  · * Also, high laser energy concentration may damage the objective lens.
  · * If using the objective lens for laser processing, there is a chance that the objective lens front surface may become dirty due to spray from the processing work.
  · * Use after ensuring sufficient working distance (WD) or inserting thin protective glass to protect the objective lens from dirt.
  · * The magnification is the value taken when using the imaging lens f = 200 mm.
  · * The magnification may differ if used with microscope lens barrels from other manufacturers.
  · * Calculate the actual magnification by checking the focal distance of the imaging lens of the lens-barrel to be used and the ratio between the focal distance of the imaging lens and that of the objective lens.
  [Product Specifications]
  · Magnification: 5x
  · NA : 0.13
  · Working distance WD: 11.6 mm
  · Focal distance f: 40 mm
  · Resolution: 2 μm
  · Focal Depth: ±16.3 μm
  · Pupil Diameter: φ10.4 mm
  · Camera Field of Vision (1/2 type): 0.96 x 1.28 mm
  · Mass: 0.09 kg

  Standard Price:	14,890,958 IDR-
  Days to Ship:	25 Day(s) or more

• 

  AS ONE Reflection objective lens OBLR series

  AS ONE

  [Features]
  · An objective lens comprised of reflecting mirrors, which can be used over a wide wavelength region of 350 nm to 7 µm because it is not affected by the chromatic aberration from the refractive index of glass.
  · Useful in failure analysis, etc., for microspectroscopy or semiconductors.
  · Using a calibration ring attached to the middle of the body, the lens barrel length can be switched.
  · With this adjustment, it can be used for various microscope lens-barrels from a lens-barrel length of 80 mm to infinite distance.
  · The aluminum film of the reflecting mirror is provided with a MgF2 protective coating so the mirror does not readily deteriorate, and can therefore be used over a long period of time.
  · As JIS Standard M20.32 (P = 0.706) is used for the mounting screw of the objective lens, it can be installed to many types of microscope lens barrels.
  · Since the focus position and size of the image do not change for visible light and ultraviolet light / infrared light, it is possible to match the invisible light image and the visible light image accurately.
  · An adapter is also available (OBLR-AMT) for mounting onto the revolver of a microscope.
  · A fixed type holder (LHO-20.32) is also available to secure reflecting objective lenses.
  · * The area near the optical axis is shielded by a reflection mirror and thus cannot be used for laser processing.
  · * Reflecting objective lenses cannot be mounted on the revolvers of some microscopes.
  · * The thickness scales of the cover glass will not move.
  · * Use after matching the lens-barrel length scale used with the lens-barrel length correction ring to the cover glass thickness scale used.
  · * The center of the optical axis is shielded by a reflection mirror, and thus the amount of received light may be extremely low or observation may be impossible when a light source with directivity is observed.
  · * There is light loss of 45% or more due to shielding by the reflection mirror (approx. 36%) and reflectance from the aluminum (approx. 90% per surface).
  [Product Specifications]
  · Magnification: 10x
  · Compatible Wavelength: 350 nm to 7 μm
  · Focal distance f: 19.9 mm
  · NA : 0.2
  · Field of View: φ1.0 mm
  · Working distance WD: 16 mm
  · Mechanical Lens Barrel Length: 80 to ∞ (variable) mm
  · Shielding Ratio: Approx. 36%

  Standard Price:	45,937,185 IDR-
  Days to Ship:	25 Day(s) or more

• 

  AS ONE Focusing lens for fiber laser HF series

  AS ONE

  [Features]
  · By using synthetic quartz for all the materials that comprise the lens, a condensing lens has successfully been realized which can also tolerate high-output lasers, or high-energy pulse lasers.
  · Can be used for condensing and collimating with various types of fixed lasers including Yb fiber lasers, YAG lasers, YVO4 lasers, etc.
  · With a lenses with a focal length of 60 mm or more, spherical aberration and coma aberration are sufficiently corrected at a wavelength of 1,064 nm, and laser collimated light can be narrowed down to the diffraction limit spot diameter.
  · It can be used with a fiber coupled laser in the wavelength range of 1,040 to 1,150 nm thanks to the antireflection coating with a wide band.
  · Because a transmittance of approximately 632.8 nm can be obtained, a He-Ne laser can be used as the guide light.
  · Dedicated lens holders (LHF-M29-25, LHF-M34-30 and LHF-M50.9-50) are available for fixing condenser lenses.
  · The HFTLSQ-15-20PF1 includes a dedicated adapter for installing the fixed condensing lens holder (LHF-M29-25).
  · The HFTLSQ-20-30PF1 includes a dedicated adapter for installing the fixed condensing lens holder (LHF-M34-30).
  · Separately sold protective glass can be attached to protect the objective lens from spray from laser processing.
  · * Use condensing lenses when imaging an object with infinite distance as the focus or changing the positional light source to parallel light.
  · * Sufficient optical performance cannot be obtained when used for imaging at a close distance, etc.
  · * The condensing lens has an orientation for light incidence.
  · * Be sure to have parallel light incident from the top (with the engraved stamp on the lens barrel upright).
  · * When reversed, chromatic or spherical aberration may increase and the condensing spot may widen or images may be out of focus.
  · * When used outside the specified wavelength range, chromatic aberration and transmittance will worsen.
  · * The condensing lens may become very hot and the condensing lens focal distance may vary if a high-power laser is used or the product is used near a light source generating intense heat.
  · * Heat dissipation measures are required if irradiating for long periods.
  · * If a smaller spotting diameter is desired, widen the incident beam diameter (1/e^2) to approximately half of the effective diameter (De) of the condensing lens.
  · * This condensing lens is not an achromatic lens.
  · * Chromatic aberration is not corrected.
  [Product Specifications]
  · [ Common Specifications]
  · Material: Synthetic Quartz
  · Frame: Aluminum; Surface Processing: Black Alumite
  · Design Wavelength: 1,064 nm
  · Coating: Anti-reflective Film
  · Transmittance: > 98.5% (1,060 – 1,080 nm), > 97% (1,040 – 1,150 nm), > 53% (600 – 700 nm)
  · Laser Yield Strength: 7 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
  · [Individual Specifications]
  · Focal distance f: 20 mm
  · Outer diameter φDc: φ24 mm
  · Effective Diameter φDe: φ12 mm
  · Length L: 16 mm
  · Fixing Screw Ma: M22, P0.75
  · Mounting Screw Mb: M22 P0.75
  · NA : 0.3
  · WD : 13.7 mm
  · Permissible Incidence Angle: ±1.8°

  Standard Price:	20,773,654 IDR-
  Days to Ship:	25 Day(s) or more

• 

  AS ONE Corporation, Pellin Broca Prism

  AS ONE

  [Features]
  · Pellin-Broca prisms are a type of Brewster angle dispersing prism and have characteristic emission at a right angle in regard to the incident direction.
  · If irradiated using a YAG laser at Brewster's angle, it can split beams of fundamental (1,064 nm) and second harmonic (532 nm) waves.
  · Because Brewster's angle and a critical angle are used, there is no loss due to reflection and high transmittance can be obtained.
  · Because Pellin-Broca prisms are not coated, they can be used with high energy pulse lasers.
  · Used by aligning the YAG basic wavelength (invisible light) subjected to the prism or the angle (Brewster's angle) at which the light amount from the second-harmonic beam (green) is the smallest.
  · Convert so that the polarization direction of the laser beam is parallel with the bottom of the prism.
  · It can also be used for spectroscopy of Ar lasers with multiple wavelength oscillation.
  · * Emitted beams with UV wavelengths are outside Brewster's angle, causing reflection.
  · * Can be used as a non-polarizing light dispersing prism, but if light is not incident at Brewster's angle it will not be output at a right angle relative to the incident angle.
  · * Spectral diffraction is possible even with incidence of an S polarized laser beam, but there will be a reflection loss between the incident surface and the emitting surface.
  · * If fingerprints or grime adhere to the non-coated surface, total reflection or non-reflection will no longer be effective.
  · * During use, make sure that nothing makes contact with the non-coated surfaces.
  · * The actual measured A and B dimensions include chamfering and are slightly shorter.
  · * Dimension tolerance is defined by the intersection position of each surface excluding chamfering.
  [Product Specifications]
  · [ Common Specifications]
  · Material: Synthetic Quartz
  · Design Wavelength: 706 nm (Intermediate between 1,063 nm and 532 nm)
  · Angular Accuracy: < 3'
  · Substrate Surface Accuracy: λ/10
  · Scratch-Dig: 20-10
  · Effective range: Ellipse inscribed in the rectangle that makes up 90% of the external diameter
  · [Individual Specifications]
  · A: 30 mm
  · B: 50 mm
  · C: 20 mm
  · θ1: 56.13°
  · θ2: 79.5°

  Standard Price:	19,744,359 IDR
  Days to Ship:	25 Day(s) or more

• 

  BEZHP-1/3-532 Expander

  AS ONE

  [Features]
  · A variable zoom type (1 to 3x zoom) laser beam expander for high power applications.
  · Collimation can be finely adjusted with the diopter correction function.
  · With a lens design that takes into account wave-front aberration, it can be used in high-accuracy optical systems such as interferometers and laser machining.
  · The optical system of the beam expander has an air gap structure that does not bond lenses. This makes it possible to also use high-output lasers.
  · By using the Galilean type lens configuration, the number of aberration correction lenses has been reduced and the total length of the expander has been shortened.
  · By turning the diopter ring located at the center of the beam expander, switching between the collimated beam and divergent beam from the focused beam is possible.
  · Used when strict collimating adjustment is required, or the position of the beam waist is varied.
  · Laser beam expander holders (BE-M22H, BE-M34H) with finely adjustable gates for fixing beam expanders are available.
  · * Beam expanders cannot be used in the reverse direction to function as beam diameter condensers.
  · * Calculate the divergence angle of the laser beam and the position of the beam waist, and use an appropriate optical system accordingly.
  [Product Specifications]
  · Variable Magnification: x1 to x3
  · Design Wavelength: 532 nm
  · Incidence Effective Diameter: φ5 mm
  · Laser Yield Strength*: 5.0 J/cm2 * Laser Pulse Width 10 ns, Repetition Frequency 20 Hz
  · Coating: Multilayer Anti-reflective Film
  · Material: Synthetic Quartz
  · Mass: 0.3 kg

  Standard Price:	48,453,538 IDR
  Days to Ship:	25 Day(s) or more

• 

  Roshon Polarizing Prism

  AS ONE

  [Features]
  · A polarizer to separate the incident light into orthogonal linear polarized light.
  · It supports the wide wavelength region from ultraviolet to infrared.
  · The emitted P-polarized light moves straight forward without displacing the optical path, and the S-polarized light exits with a particular separation angle.
  · RSPCQ-10 made of crystal and RSPMF-10 made of MgF2 monocrystal that supports DUV and wider bands are available.
  · * The extinction ratio of linearly polarized transmittance light will also change if the incident angle is changed.
  [Product Specifications]
  · [ Common Specifications]
  · Beam Deflection Angle (P polarization): < 3'
  · Wave-Front Accuracy: λ/4
  · Coating: Non-Coated
  · Laser Yield Strength: 0.3 J/cm2 (Pulse Width 10 ns)
  · Scratch-Dig: 20-10
  · Protective Frame Materials: Aluminum (Surface Processing: Black Alumite)
  · [Individual Specifications]
  · Material: Crystal
  · Compatible Wavelength: 200 to 2,300 nm
  · Extinction Ratio: < 2 x 10^-4
  · Separation Angle : 1 – 1.5°
  · φA: φ10 mm
  · φD X L: φ25.4 X 28 mm

  Standard Price:	34,499,216 IDR
  Days to Ship:	25 Day(s) or more

• 

  AS ONE Long Pass Filter LOPF-25C Series

  AS ONE

  [Features]
  · A wavelength (color) separation filter with a sharp rise that cuts light on the short wavelength side and transmits light on the long wavelength side.
  · Can be used for bioimaging and flow cytometry.
  · In the cut band, this filter features light blocking properties superior to those of OD5 and has transmittance that exceeds an average of 90% in the transmission band.
  · There is almost no light absorption by the film thanks to the dielectric multilayer film coating.
  · * The transmittance wavelength characteristics may change if using an incident angle other than 0°.
  · * In general, the larger the incident angle, the more the wavelength characteristics shift to the shorter wavelength side.
  [Product Specifications]
  · [ Common Specifications]
  · Coating: Dielectric Multilayer Film
  · Incidence Angle: 0°
  · Scratch-Dig: 60-40
  · [Individual Specifications]
  · Transmission Band Wavelength: 308 – 420 nm
  · Transmission Band Transmittance: > Average 85%
  · Transmission Limit Wavelength: 306 nm
  · Cut Band Wavelength: 200 to 300 nm
  · Cut Band Optical Density (Average): 5
  · Thickness t: 3.5 mm

  Standard Price:	6,110,202 IDR-
  Days to Ship:	25 Day(s) or more

• 

  AS ONE Near Infrared Objective Lenses PAL Series

  AS ONE

  [Features]
  · A high NA objective lens with infinite correction function used for femtolasers (770 to 790 nm) and YAG laser (1,064 nm) processing.
  · As it is designed to suppress aberration in the visible range, the processed surface can be observed on the same axis as the laser beam.
  · With a large working distance (WD), natural observational images can be obtained right up to the periphery of the visual field by compensating for the curvature of the field.
  · An objective lens used for coaxial observation systems, optical systems using lasers, etc., using infinity compensation.
  · The near infrared objective lens (PAL-20-NIR(780)-LC07/PAL-50-NIR(780)-LC07) shows the highest performance for transmission through glass substrate (0.7 mm), assuming an LCD treatment.
  · It can also be used for observing infrared light.
  · PAL-20-NIR-HR-LC00/PAL-50-NIR-HR-LC00 include a protective glass unit (glass thickness: 1.8 mm).
  · Can be used to protect the objective lens from spray scattered from laser processing.
  · The protective glass in the protective glass unit can be replaced.
  · Various objective lenses can be used with pulsed lasers, even in the visible light range (532 nm).
  · For each lens, the laser strength (reference value) at the wavelength of 532 nm is 0.1 J/cm^2. (Note: Pulse Width 10 ns, Repetition Frequency 20 Hz)
  · A fixing type objective lens holder (LHO-26) is available.
  · An observation unit with coaxial illumination (OUCI-2) and dichroic mount for laser introduction (DIMC) are available as lens barrels for laser processing.
  · * Widen the incident beam to half the pupil diameter (1/e^2) if using the objective lens for laser processing.
  · * A small condensed light spot cannot be achieved if the incident beam is too thin. Also, high laser energy concentration may damage the objective lens.
  · * If using the objective lens for laser processing, there is a chance that the objective lens front surface may become dirty due to spray from the processing work.
  · * Use after ensuring sufficient working distance (WD) or inserting thin protective glass to protect the objective lens from dirt.
  · * Pulse width may expand if a femtosecond laser beam of 100 fs or less enters.
  · * The magnification is the value taken when using the imaging lens f = 200 mm.
  · * The magnification may differ if used with microscope lens barrels from other manufacturers.
  · * Calculate the actual magnification by checking the focal distance of the imaging lens of the lens-barrel to be used and the ratio between the focal distance of the imaging lens and that of the objective lens.
  · * PAL-20-NIR-HR-LC00/PAL-50-NIR-HR-LC00 is designed to take into account the thickness of the attached protective glass.
  · * It is not possible to achieve the specified performance if the protective glass is removed.
  [Product Specifications]
  · Magnification: 20x
  · NA : 0.45
  · Working distance WD: 20 mm
  · Focal distance f: 10 mm
  · Resolution: 0.6 μm
  · Focal Depth: ±1.4 μm
  · Pupil Diameter: φ9.0 mm
  · Camera Field of Vision (1/2 type): 0.24 x 0.32 mm
  · Laser Yield Strength: 0.2 J/cm2, Wavelength: 1,064 nm
  · Mass: 0.44 kg
  · * Laser Pulse Width 10 ns, Repetition Frequency 20 Hz

  Standard Price:	126,002,967 IDR
  Days to Ship:	25 Day(s) or more

• 

  PFL-10-UV/NUV-AG Lens

  AS ONE

  [Features]
  · An objective lens that can be used with YAG pulsed laser processing equipment with second (532 nm), third (355 nm), or fourth (266 nm) harmonic waves.
  · Featuring a YAG third harmonic that achieves high transmittance.
  · With a large working distance (WD), natural observational images can be obtained right up to the periphery of the visual field by compensating for the curvature of the field.
  · An objective lens used for coaxial observation systems, optical systems using lasers, etc., using infinity compensation.
  · Samples can be observed in visible light (400-500 nm).
  · A fixing type objective lens holder (LHO-26) is available.
  · An observation unit with coaxial illumination (OUCI-2) and dichroic mount for laser introduction (DIMC) are available as lens barrels for laser processing.
  · * Widen the incident beam to half the pupil diameter if using the objective lens for laser processing.
  · * A small condensed light spot cannot be achieved if the incident beam is thin.
  · * Also, excessive laser energy concentration may damage the objective lens.
  · * If using the objective lens for laser processing, there is a chance that the objective lens front surface may become dirty due to spray from the processing work.
  · * Use after ensuring sufficient working distance (WD) or inserting thin protective glass to protect the objective lens from dirt.
  · * The magnification is the value taken when using the imaging lens f = 200 mm.
  · * The magnification may differ if used with microscope lens barrels from other manufacturers.
  · * Calculate the actual magnification by checking the focal distance of the imaging lens of the lens-barrel to be used and the ratio between the focal distance of the imaging lens and that of the objective lens.
  [Product Specifications]
  · Magnification: 10x
  · NA: 0.2
  · Working distance WD: 13.5 mm
  · Focal distance f: 20 mm
  · Resolution (λ = 550 nm): 1.4 µm
  · Focal Depth (λ=550 nm): ±6.9 μm
  · Pupil Diameter: φ8 mm
  · Camera Field of Vision (1/2 type): 0.48 x 0.64 mm
  · Mass: 0.3 kg

  Standard Price:	217,506,719 IDR
  Days to Ship:	25 Day(s) or more

• 

  SLC2-300 Lens Cleaner

  AS ONE

  [Features]
  · This is a solvent used when removing dirt such as oils and grease or mist adhering to optical elements.
  · A cleaner that does not leave uneven wiping thanks to high volatility.
  · Moisten lens paper with the product for use.
  · It can be used for mirrors with protective coatings, and for dielectric multilayer mirrors and lenses, etc.
  · SLC-300 is a manually pressed pump type that produces suitable amounts of the cleaner at each press.
  · SLC2-300 features a one-touch cap with excellent air tightness.
  · * This product is specified as a hazard grade II class 4 type 1 petroleum.
  · * This product is prohibited from being brought on board aircraft or being transported via aircraft.
  · * Do not use the product for a gold mirror or an aluminum mirror without protection coating.
  · * Wiping the mirror surface will leave scratches.
  [Product Specifications]
  · Capacity : 300 cc
  · Heptane (isomer mixture): 95%
  · Anti-static Agent: 5%
  · Container Type: "One touch" cap

  Standard Price:	418,414 IDR
  Days to Ship:	8 Day(s) or more

• 

  Spacer EA979DH-31

  ESCO

  【Product Specifications】
  ・Material …PVC
  ・It is convenient when filling a small gap.
  ・It can be stacked exactly at the uneven part of the surface.
  ・Size(mm) …40 x 40 x 0.5(T)
  ・Qty. Per Unit …60 Sheets

  Standard Price:	21,856 IDR
  Days to Ship:	8 Day(s) or more

• 

  Spacer EA979DH-32

  ESCO

  【Product Specifications】
  ・Material …PVC
  ・It is convenient when filling a small gap.
  ・It can be stacked exactly at the uneven part of the surface.
  ・Size(mm) …40 x 80 x 0.5(T)
  ・Qty. Per Unit …30 Sheets

  Standard Price:	30,234 IDR
  Days to Ship:	8 Day(s) or more

• 

  AS ONE Corporation, O-Ring for Full Jacket (Perfluoro)

  AS ONE

  AS ONE, O-ring, O-ring for Full Jacket (Perfluoro)
  Materials: Perfluoro
  DN: 150
  Compatible reaction vessel (For mL): 3000

  Standard Price:	32,452,873 IDR
  Days to Ship:	22 Day(s) or more

• 

  AS ONE Corporation, Aluminum Adhesive Sheet

  AS ONE

  [Features]
  ·It is a very thin and soft adhesive sheet that can be easily cut with scissors, utility knife, etc., if necessary.
  ·After cutting, just peel off the mount and paste it, and even if the pasting work fails, it is not strong adhesive, so you can easily make minor corrections.
  ·It is suitable as a waterproof sheet for protecting draft chambers / fume hoods and laboratory tables, underlaying chemical storage cabinet / chemical trays, and when you want to avoid daily corrosion such as floors and kitchens as much as possible.
  ·The recommended storage environment is +21°C and 50% humidity in the dark.
  ·An FEP film with a thickness of approx. 0.025 mm, which is the same as the fluoropolymer adhesive sheet, and aluminum foil with a thickness of approx. 0.045 mm, which has excellent heat resistance, are crimped to the surface, and an acrylic adhesive of approx. 0.03 mm is applied.
  

  Standard Price:	20,653,536 IDR
  Days to Ship:	14 Day(s) or more

• 

  AS ONE Corporation, O-Ring for Full Jacket (Perfluoro), 9200 Series

  AS ONE

  Product classification: single Item, material: Perfluoro
  [Part Number: 62-2119-56]
  Standard: 35-V
  Materials: Perfluoro
  [Part Number: 62-2119-57]
  Materials: Perfluoro
  DN: 60
  Compatible reaction vessel (For mL): 300/500
  [Part Number: 62-2119-58]
  Materials: Perfluoro
  DN: 100
  Compatible reaction vessel (For mL): 1000
  [Part Number: 62-2119-59]
  Materials: Perfluoro
  DN: 120
  Compatible reaction vessel (For mL): 2000
  [Part Number: 62-2119-60]
  Materials: Perfluoro
  DN: 200
  Compatible reaction vessel (For mL): 6000

  Standard Price:	2,427,264 IDR-
  Days to Ship:	22 Day(s) or more

• 

  AS ONE Corporation, O-Ring for Reaction Vessel (Perfluoro), 9220 Series

  AS ONE

  AS ONE Corporation
  Product category: Single item
  Quantity: 1 pc.
  Materials: Perfluoro

  Standard Price:	1,233,928 IDR-
  Days to Ship:	15 Day(s) or more

• 

  AS ONE Corporation, O-Ring for Separable Tools, 9260 Series

  AS ONE

  AS ONE Corporation
  Product category: Single item
  Quantity: 1 pc.
  Materials: Perfluoro/Viton/

  Standard Price:	170,668 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Steel Rubber Sheet, MGP Series

  AS ONE

  [Features]
  ·A rubber sheet containing steel (iron powder).
  ·It can be cut freely with scissors or a utility knife, and is soft, so it can be attached to curved surfaces.
  ·You can easily use the magnet wherever you want to use it just by pasting it.
  ·If you stick it on the back of wallpaper, wood board, or decorative sheet, the magnet will stick to it.
  ·Formaldehyde emission class F of the Building Standard Law of Japan☆☆☆☆is.
  

  Standard Price:	270,199 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Metallic Material for Melting (Gd)

  AS ONE

  Shot-shaped gadolinium used to manufacture alloys by melting metal materials at high temperatures.

  Standard Price:	6,963,566 IDR
  Days to Ship:	19 Day(s) or more

• 

  Metallic Material for Melting (Os)

  AS ONE

  Shot-shaped osmium used to manufacture alloys by melting metal materials at high temperatures.

  Standard Price:	12,415,967 IDR
  Days to Ship:	19 Day(s) or more

• 

  Metallic Material for Melting (Sr)

  AS ONE

  Shot-shaped strontium used to manufacture alloys by melting metal materials at high temperatures.

  Standard Price:	10,373,810 IDR
  Days to Ship:	19 Day(s) or more

• 

  Metallic Material for Melting (Tm)

  AS ONE

  Shot-shaped thulium used to manufacture alloys by melting metal materials at high temperatures.

  Standard Price:	13,784,262 IDR
  Days to Ship:	26 Day(s) or more

• 

  0.55 mm, Cotton Sailcloth (Number 11)

  ESCO

  Weak water repellent finish 0.55 mm cotton canvas with dyeing glue.
  Colored items may fade.

  Standard Price:	1,583,426 IDR-
  Days to Ship:	8 Day(s) or more

• 

  1.0 mm Cotton Sailcloth (Number 8)

  ESCO

  Weak water repellent finish 1.0 mm cotton canvas with dyeing glue.
  Colored items may fade.

  Standard Price:	1,980,773 IDR-
  Days to Ship:	8 Day(s) or more

• 

  PTFE Net, NR0515 Series

  FLONCHEMICAL

  Standard Price:	26,289,231 IDR-
  Days to Ship:	Quote

• 

  Safety Cover

  SANPLATEC

  Standard Price:	167,692 IDR-
  Days to Ship:	12 Day(s) or more

Loading...